ELECYLINDER Series Options

RCON-EC Connection Specification

• Model: ACR
• Description:
  This option is used to connect over an R-unit to a field network.
  Note: If selected, the power supply must be a twin power supply and the input/output specification must be NPN. Therefore, it cannot be selected with the TMD2 or PN options.

Brake

• Model: B
• Description:
  When the actuator is mounted vertically, this brake acts as a holding mechanism, preventing the rod from falling and damaging attachments when power or servo is turned off.
  Note: Not available for ECO type (EC-ST15ME).

Designated Grease Specification

• Model: G5
• Description:
  The grease applied to the actuator ball screw, linear guide, and rod sliding surface is replaced with food processing machine grease (White Alcom grease).
  Note: Not available for ECO type (EC-ST15ME).

Opposite Home Position Specification

• Model: NM
• Description:
  For the standard specification, the home position is away from the motor end. This option allows the home position to be set at the motor end to accommodate variations in equipment layout.

Front Spacer

• Model: FS

• Description:
  When selecting the brake option, this front spacer is required if there is interference between the workpiece and the motor unit.
  Note: Only available for EC-ST11 models.

  Workpiece Mounting Surface Dimensions:

  • 96 (W) x 110 (L)
  • 30 (H)
  • 44 (D)
  • 4-φ8.2 φ4 H9 reamed depth 6

  Additional Details:

  • 42 ±0.1 (Oblong hole)
  • 42 ±0.1 (2-φ4 H9 reamed depth 6)
  • Hex socket bolt (M8)
  • Positioning pin

  Material: Aluminum
  Weight: 0.3 kg

PNP Specification

• Model: PN
• Description:
  EC Series products provide NPN specification input/output for connecting external devices as standard. Specifying this option changes input/output to the PNP specification.
  Note: Cannot be ordered simultaneously with the ACR option, which is NPN specification.

Split Motor and Controller Power Supply Specification

• Model: TMD2
• Description:
  This option includes an actuator operation stop input. It allows shutting down the actuator drive power only.
  Note: Cannot be selected with the ACR option (the RCON-EC connection specification is a split motor and controller power supply specification).

Wireless Communication Specification

• Model: WL
• Description:
  This option enables wireless communication with the TB-03 teaching pendant. The start point, end point, and AVD can be adjusted via wireless communication.

Wireless Axis Operation Specification

• Model: WL2
• Description:
  In addition to enabling wireless communication (start point, end point, and AVD adjustment), WL2 allows for axis travel operation tests (forward end/backward end movement, jog, and inching). However, it is not meant for automatic operation.
  Note: Customers cannot change WL to WL2 or vice versa. Please contact IAI for this.