Anfield Orbital Motors
Anfield offers a range of low-speed, high-torque (LSHT) hydraulic motors, primarily based on the Gerotor and Geroler gear set designs, known for their compactness, efficiency, and reliability in high-torque, low-speed applications. These motors are interchangeable with other major domestic and European brands and are manufactured to ISO 9001-2008 standards. The motors are used in parallel or series systems and are suitable for various hydraulic applications.
Key Motor Series and Specifications:
-
BMM Series:
- Displacement: 0.5-3.05 in³/rev (8-50 cm³/rev)
- Max Pressure: 2030 PSI (14 MPa)
- Speed: 30-1950 RPM
- Design: Gerotor, efficient, low-weight, high-torque.
-
BMP/BMPH Series:
- Displacement: 3-24 in³/rev (50-400 cm³/rev)
- Max Pressure: 2400 PSI (16.3 MPa)
- Speed: 30-880 RPM
- Design: Gerotor, used in both parallel and series systems.
-
BMR/BMRS Series:
- Displacement: 3-23 in³/rev (50-375 cm³/rev)
- Max Pressure: 3000 PSI (20 MPa)
- Speed: 30-970 RPM
- Design: Geroler, low noise, high efficiency, smooth start-up.
-
BMH Series:
- Displacement: 12-30 in³/rev (200-500 cm³/rev)
- Max Pressure: 3000 PSI (20 MPa)
- Speed: 30-430 RPM
- Design: Geroler, smooth start-up at low pressure.
-
BMSY & BMT Series:
- Displacement: 5-49 in³/rev (80-800 cm³/rev)
- Max Pressure: 3250-3400 PSI (22.5-24 MPa)
- Speed: 30-800 RPM
- Design: Disc-type, high pressure, multifunctional operation.
-
BMV Series:
- Displacement: 19-49 in³/rev (315-800 cm³/rev)
- Max Pressure: 4000 PSI (28 MPa)
- Speed: 10-446 RPM
- Design: Geroler, high axial and radial force capacity.
-
BMER-2 Series:
- Displacement: 7.2-45.45 in³/rev (118-745 cm³/rev)
- Max Pressure: 3481 PSI (24 MPa)
- Speed: 30-490 RPM
- Design: Geroler, high pressure, smooth operation.
General Motor Specifications:
- Oil Operating Temp: 70-150°F (20-60°C), Max 190°F (90°C).
- Filtration: ISO Cleanliness Code 18/3.
- Oil Viscosity: Minimum 100 SUS.
- Startup: Motors should run at less than 30% of rated performance for the first hour.
- Pressure: Motors can operate at high pressures (up to 4000 PSI) depending on the model.
These motors are ideal for industries requiring compact, reliable, and efficient hydraulic power solutions, and they are compatible with a wide range of hydraulic systems.
