2-DAY $10 SHIPPING OR FREE SHIPPING OVER $500 **
About
Certifications
Framing
Electrical
Motion Control
Hydraulic
Ethernet used throughout the world to network millions of PCs has now evolved into a viable industrial network. Ethernet is an open architecture high-level communication network that meets the demands of today’s industrial applications requiring high-speed (10/100 Mbit/s), high-throughput and flexibility. Additionally, Ethernet technology can integrate an on-board web server, which can make the node readily accessible to any standard web browser for configuration, testing and even retrieval of technical documentation.
Numatics’ G3 nodes for Ethernet have an integrated graphic display and are capable of addressing combinations of up to 1200 outputs and 1200 inputs.
The G3 EtherNet/IP™ nodes have been tested and approved for conformance by the ODVA.
Electrical Data | Voltage | Current |
Node Power at Max. Brightness | 24 VDC +/- 10% | 0.0657 Amps |
Valves & Discrete I/O | 24 VDC +/- 10% | 8 Amps Maximum |
Power Connector | Single key 4 pin 7/8" MINI type (male) | |
Communication Connector | D-coded 4 pin M12 type (female) | |
LEDs | Module Status, Network Status and Activity/Link | |
Weight | 255g / 9 oz |
Operating Data | ||
Temperature Range (ambient) | -23C - +46C (-10F - +115F) | |
Humidity | 95% relative humidity, non-condesing | |
Vibration/Shock | IEC 60068-2-27, IEC60068-2-6 | |
Moisture Protection | IP65 (with appropriate assembly and termination) |
Configuration Data | ||
Graphic Display | Display used for setting IP Address, Subnet mask, Fault/Idle Actions, DHCP/BootP and all other system settings | |
ARM | (Auto Recovery Module) Optional module that contains automatic recovery of system setting in the event of total or partial system failure | |
Maximum Valve-Solenoid Outputs | 32 | |
Maximum Addressable I/O Points | Various combinations of 1200 outputs and 1200 inputs |
Network Data | ||
Supported Baud Rates | 10 Mbit / 100 Mbit | |
Bus Connector | D-coded 4 pin M12 type (female) | |
Diagnostics | Power, short, open load conditions and module health and configuration are monitored | |
Special Features | Integrated web server, fail-safe device settings, HTTP, FTP, and UNICAST (for EtherNet/IP™ |
ID #: 142493
TECO HQ is home to a state of the art services department! We have pneumatic specialists available to help you with any solution.
Call us today to configure what you have in mind!
Our services starts the moment you buy a component, but it doesn't stop there...
Increasing efficiency, reducing risk and improving the quality of your products since 1937