2-DAY $10 SHIPPING OR FREE SHIPPING OVER $500 **
About
Certifications
Framing
Electrical
Motion Control
Hydraulic
EtherCAT is an open ethernet-based fieldbus protocol developed by Beckhoff. EtherCAT provides real-time performance and topology flexibility with short data update/cycle times and low communication jitter. Numatics’ G3 EtherCAT node has an integrated graphic display for simplified commissioning and diagnostics. It is capable of addressing combinations of up to 1200 outputs and 1200 inputs. The G3 nodes for EtherCAT have been designed and tested to conform with EtherCAT specifications set forth by the ETG.
Electrical Data | Voltage | Current |
Node Power at Max. Brightness | 24 VDC +/- 10% | 0.073 Amps |
Valves & Discrete I/O | 24 VDC +/- 10% | 8 Amps Maximum |
Power Connector | Single key 5 pin 7/8" MINI type (male) | |
Communication Connector | Two D-coded 4 Pin M12 type (Female) | |
LEDs | Module Status, Network Status and Activity/Link | |
Weight | 227g / 8 oz |
Operating Data | ||
Temperature Range (ambient) | -23C - +46C (-10F - +115F) | |
Humidity | 95% relative humidity, non-condesing | |
Vibration/Shock | IEC 60068-2-27, IEC60068-2-6 | |
Moisture Protection | IP65 (with appropriate assembly and termination) |
Configuration Data | ||
Graphic Display | Display used for setting IP Address, Subnet Mask, Fault/Idle Actions, and all other system settings | |
ARM | (Auto Recovery Module) Optional module that contains automatic recovery of system setting in the event of total or partial system failure | |
Maximum Valve-Solenoid Outputs | 32 | |
Maximum Addressable I/O Points | Various combinations of 1200 outputs and 1200 inputs |
Network Data | ||
Supported Baud Rates | 10 Mbit / 100 Mbit | |
Bus Connector | Two D-coded 4 Pin M12 type (Female) | |
Diagnostics | Power, short, open load conditions and module health and configuration are monitored | |
Special Features | Integrated web server, fail-safe device settings |
ID #: 139574
TECO HQ is home to a state of the art services department! We have pneumatic specialists available to help you with any solution.
Call us today to configure what you have in mind!
Our services starts the moment you buy a component, but it doesn't stop there...
Increasing efficiency, reducing risk and improving the quality of your products since 1937