Mfr. Part #: P580AEDN1010A00
ID #: 139865
Aventics Manifold part 580 Series Devicenet Node
| Electrical Data | Voltage | Current |
| Node Power | 24 VDC +/- 10% | 0.05 Amps |
| Bus Power | 11-25 VDC | 0.05 Amps |
| Valves | 24 VDC +/- 10% | 4 Amps Maximum |
| Power Connector | A-Coded 4 Pin M12 (Male) | |
| Communication Connector | A-Coded 5 Pin M12 (Male) | |
| LEDs | Module Status and Network Status | |
| Weight | 252g/8.9oz |
| Operating Data | |
| Temperature Range (ambient) | -23 ºC to 46 ºC (-10 ºF to 115 ºF) |
| Humidify | 95% relative humidity, non-condensing |
| Vibration/Shock | IEC 60068-2-27, IEC60068-2-6 |
| Moisture Protection | IP65 Certified |
| Configuration Data | |
| Graphic Display | Display used for setting Node Address, Baud Rate, Fault/Idle Actions, and all other system settings |
| Maximum Valve-Solenoid Outputs | 32 |
| Network Data | |
| Supported Baud Rates | 125K Baud, 250K Baud, 500K Baud, with Auto-Baud detection |
| Supported Connection Type | Polled, Cyclic, Change of State (COS) and combination Message Capability |
| Bus Connector | Single key 5 pin M12 (male) |
| Diagnostics | Power, short, open load conditions are monitored |
| Special Features | Supports Auto-Device Replacement (ADR) and fail-safe device settings |
Interested in integrating these products into your application? Connect with us today and discover why customers have trusted us since 1937
TECO HQ is home to a state of the art services department! We have Pneumatic specialists available to help you with any solution.
Call us today to configure what you have in mind!
Our services starts the moment you buy a component, but it doesn't stop there...
