Mfr. Part #: 500-AH
ID #: 4932
The ControlAir Type 500X converts a current or voltage input signal to a linearly proportional pneumatic output pressure. This versatile instrument is designed for control applications that require a high degree of reliability and repeatability at an economical cost.
| Specifications | |
| Input | 4-20 mA |
| Output Range | 3-120 psig (0.20-8.2 bar) |
| Max. Supply Pressure | 125-150 (8.6-10.3 Bar) |
| Maximum Air Consumption | 0.05 scfm (1.41 NL/min) midrange typical |
| Flow Rate | 4.5 scfm (127.35 Nl/min) @ 25 psig (1.7 Bar) supply 12.0 scfm (340 NL/min at 100 psig (6.8 bar) |
| Temperture Range (operating) | -20° to +140°F ('-30° to 60°C) |
| Relief Capacity | 7 scfm (198 NL/min) at 10 psig (0.7 bar) above 20 psig (1.3 bar) setpoint |
| Impedance | 4-20 mA 260 Ohms, 0-10 VDC 805 Ohms |
| Terminal Based Linearity | <± 0.75% of span |
| Hysteresis | < 1.0% of span < 0.5% of span |
| Response Time | Dependent on pressure range – typically less than 0.25 sec. for 3-15 psig units |
| Media | Oil free, clean dry air filtered to 40 micron |
| Electrical Connection | Conduit 1/2" NPT, DIN 43650 |
| Enclosure | Nema 1 |
| Port Sizes | Pneumatic: 1/4 NPT (1/4 BSP option) Electric: 1/2 NPT (1/2 BSP option) |
| Weight | 2.1 lbs (0.94 kg.) |
Interested in integrating these products into your application? Connect with us today and discover why customers have trusted us since 1937
TECO HQ is home to a state of the art services department! We have Pneumatic specialists available to help you with any solution.
Call us today to configure what you have in mind!
Our services starts the moment you buy a component, but it doesn't stop there...
