The Type 590X Manifold Mount I/P Transducer converts a variable electrical signal to a low flow proportional pneumatic output. Its compact size, light weight and immunity to shock and vibration make it ideal for use in process control valve positioner applications.
Conversion technology utilizing open loop control and a low mass magnet produces accurate pressure control at an economical cost. The Type 590X can mount in any position and is impervious to RFI/EMI interference.
| Specifications | |
| Input | 4-20 mA |
| Output Range | 3-15 psig (0.20-1.0 bar) |
| Air Consumption | 6 scfh (170 Nl/hr) |
| Max. Supply Pressure | 42 psig (2.8 bar) |
| Flow Capacity | 2.4 scfm (67.92 Nl/min) |
| Ambient Temperature Limits | -40° to +158°F (-40° to +70°C), -67° to +158°F (-55° to +70°C) |
| Relative Humidity | 75% average – 95% short time non-condensing |
| Impedance | 260 Ohms @ 70°F (21°C) |
| Loop Load | 5.2 volts @ 70°F (26°C) |
| Linearity (Independent) | <+ 0.5% of span |
| Hysteresis | <+ 0.3% of span |
| Deadband | <+ 0.1% of span |
| Repeatability | <+ 0.3% of span; <+ 0.15% of span typical |
| Mounting Orientation | <+ 0.5% / 90 degree change (metric) |
| Air Supply Sensitivity | <+ 0.3% per 1.5 psig change |
| Vibration Effect | <+ 1% up to 10g and 20-80 Hz. |
| Temperature Effect | <+ 0.75% / 10°F change (metric) |
| Housing | Nema 1 (IP 20) |
| Port Size | 1/8" NPT |
| Media | Clean, dry, oil-free, instrument air, filtered to 40 micron |
| Electrical Connection | Terminal block |
| Mounting | Pipe, DIN rail |
| Materials (Body) | Aluminum, Plastic |
| Materials (Other) | Buna-N, Stainless Steel, Brass, Zinc-plated Steel, Polypropylene |
ID #: 64186
TECO HQ is home to a state of the art services department! We have pneumatic specialists available to help you with any solution.
Call us today to configure what you have in mind!
Our services starts the moment you buy a component, but it doesn't stop there...
United StatesGreat all around experience.
