2-DAY $10 SHIPPING OR FREE SHIPPING OVER $500 **
About
Certifications
Framing
Electrical
Motion Control
Hydraulic
The ControlAir Type 500X converts a current or voltage input signal to a linearly proportional pneumatic output pressure. This versatile instrument is designed for control applications that require a high degree of reliability and repeatability at an economical cost.
The Type 500X is available in two different versions. The lower range model is designed for standard process control applications which typically utilize a 3 to 15 psig (0.2 to 1 bar) output. The extended range unit provides up to 145 psig (10 bar) output for higher pressure industrial pneumatic and process control system requirements.
Specifications | |
Input | 4-20 mA, 180 Ohms |
Output Range | 3-15 psig (0.20-1 bar) |
Max. Supply Pressure | 18-100 (2.1-6.9) |
Supply Pressure Sensitivity - Low Output Range | <+ 0.1% of span per psig (<+ 0.15% of span per 0.1 bar) |
Supply Pressure Sensitivity - High Output Range | <+ 0.04% of span per 1.0 psig (0.07 bar) |
Flow Rate | 4.5 scfm (127.35 Nl/min) @ 25 psig |
Maximum Air Consumption | 0.05 scfm (1.41 NL/min) midrange typical |
Repeatability | < 0.5% of span < 0.5% of span |
Hysteresis | < 1.0% of span < 0.5% of span |
Response Time | Dependent on pressure range – typically less than 0.25 sec. for 3-15 psig units |
Media | Oil free, clean dry air filtered to 40 micron |
Electrical Connection | Conduit 1/2" NPT, DIN 43650 |
Enclosure | Nema 4X (IP65) |
Ambient Temperature Limits | -20° to +140°F ('-30° to 60°C) |
Port Sizes | 1/4 NPT (Pneumatic), 1/2 NPT (Electric) |
Weight | 2.1 lbs (0.94 kg.) |
ID #: 186661
TECO HQ is home to a state of the art services department! We have pneumatic specialists available to help you with any solution.
Call us today to configure what you have in mind!
Our services starts the moment you buy a component, but it doesn't stop there...
Increasing efficiency, reducing risk and improving the quality of your products since 1937