PRODUCTS >> Automation Group Products >> Electric Actuators >> Linear Electric Actuators >> Clean Room System

Clean Room System

 
The CLEAN ROOM SYSTEM units are linear actuators with belt driven transmission and are specifically designed for Clean Room applications
They are supplied with a certificate issued by the IPA Fraunhofer Institute in Stuttgard, which certifies compliance with class ISO 3 (DIN EN ISO 14644-1), or with class Fed Std 0.01 (FED 209 E).
 
The system prevents particles from being discharged in the environment where the linear unit is located. This has been achieved by using a special straight seal that closes the horizontal opening where the slider moves, as well as by the operation of a 0.8 vacuum pump connected to 2 vacuum pipes located inside the drive head and the idle head. The system allows vacuum to be generated inside the unit so that any particles released when the system is operating are sucked towards the air filtration areas. Clean Room System linear actuators components are all made of stainless steel or undergo special treatments ensuring a low particle release. The lubricants of all bearings and linear rails are special lubricants designed for use in CLEAN ROOMS or in VACUUM environments.
If the system is used in dirty environments, the CLEAN ROOM SYSTEM linear units can be pressurized to 0.8 bar to prevent any outside particles from negatively affecting its smooth operation.
 
 
Reference
Family
Product
ONE
Section
Balls
Rollers
 
Driving
Toothed belt
Screw
 
Anticorrosion
Protection
Size
50-80-110
Max. load capacity per carriage [N]
Fx
4410**
Fy
79000*
Fz
79000*
Max. static moment per carriage [Nm]
Mx
1300*
My
7110*
Mz
7110*
Maximum speed [m/s]
5
Maximum acceleration [m/s2]
50
Repeatability accuracy [mm]
0.05
Ma. Travel or stroke (per system) [mm]
6000***
* In order to reach sufficient static safety, we recommend using max. 20% of the theoretical value. 
** In order to reach sufficient static safety for the toothed belt, we recommend using max. 80% of the theoretical value. 
*** Longer stroke is available for jointed version.

 

Available sizes for linear actuators: ONE 50, ONE 80, ONE 110

Product specifically designed for automation solutions in clean rooms up to class ISO1 (DIN EN ISO 14644-1)

Made of low particle emission materials.

Uses special lubricants for “clean rooms”.

Max. speed: 5 m/s

Max. acceleration: 50 m/s2

Repeat accuracy: 0,05 mm

Max. static load: Fx 4410 N, Fy 79.000 N, Fz 79.000 N

Max. static moment: Mx 1.300 Nm, My 7.110 Nm, Mz 7.110 Nm

International patent registered for the CLEAN ROOM SYSTEM line (DIN EN ISO 14644-1)

 

 

 

 

 

 

CONTACT US

1069 Serpentine Lane

Pleasanton, CA 94566

Phone (877) 600-8585

Fax       (925) 426-9539

sales@tecopneumatic.com

ASSOCIATED PRODUCTS

No Associated Products