PRODUCTS >> Automation Group Products >> Linear Motion >> Compact Rail

Compact Rail

 
 
A Linear system consisting of a steel linear rails with induction hardened raceways and high precision radial ball bearing sliders, also made of hardened steel. The linear guides are affordable and easy to install on all types of surfaces, including non-machined surfaces.

Three linear rail types, T, K and U profiles, allow for compensation of inherent misalignment, e.g. machine tool housing

Internal raceways ensure compact dimensions

Two slider types: N-series with aluminum die-cast bodies and C-series with steel bodies

Lubricated-for-life roller bearings

Resistant to dirt and other common debris

Suitable for applications with speeds up to 9 m/s

Rail width sizes: 18mm, 28mm, 35mm, 43mm and 63mm

Adjustable preload

The raceways are located inside a C profile, protected from dirt. The linear rail with shaped raceways (T), the linear rail with flat raceways (U) and the linear rail with mixed shaped raceways (K) may be combined differently for all applications where parallelism errors on one or both planes must be compensated.
 
Reference
Family
Product
TLC
Section
Shape
Self-alignment
+++
Slider
Balls
 
Rollers
Anticorrosion
Rail shape
Hardened raceways
Maximum load capacity per slider [N]
C 0rad
15000
C 0ax
10000
Max. dynamic load capacity [N] C 50
36600
Maximum moment [Nm]
Mx
350
My
689
Mz
1830
Maximum speed * [m/s]
9
Maximum acceleration [m/s2]
20
Maximum rail length [mm]
4080**
Operating temperature
-30°C/+120°C
* The maximum value is defined depending on the application. 
 
Technical Features

Available sizes for T-rail, TR-rail, U-rail: 18, 28, 35, 43, 63

Available sizes for K-rail: 43, 63

Max. operating speed: 9 m/s ( 354 in/s) (depending on application)

Max. acceleration: 20 m/s2 ( 787 in/s2 ) (depending on application)

Max. radial load capacity: 15,000 N ( per slider)

Temperature range: -30 °C to +120 °C (-22 °F to +248 °F ) briefly up to max. +170 °C (+338 °F )

Available rail lengths from 160 mm to 3,600 mm (6.3 in to 142 in) in 80-mm increments (3.15 in), longer single rails up to max. 4,080 mm (160.6 in) on request

Roller pins lubricated for life

Roller seal/shield: 2RS (splash-proof ), 2Z ( steel cover disk )

Roller material: steel 100Cr6

Rail raceways induction hardened and ground

Rails and slider bodies are standard zinc-plated according to ISO 2081

Rail material of T- and U-rails in sizes 18: cold-drawn roller bearing carbon steel C43 F

Rail material of K-rails, as well as T- and U-rails in size 28 to 63: CF53

 
 
 
 

CONTACT US

1069 Serpentine Lane

Pleasanton, CA 94566

Phone (877) 600-8585

Fax       (925) 426-9539

sales@tecopneumatic.com

ASSOCIATED PRODUCTS

No Associated Products