PRODUCTS >> Pneumatic Actuators >> Linear Actuators >> Round Type Repairable >> Allenair Small Bore, 1/2", 3/4" and 1-1/8" bore

Allenair Small Bore, 1/2", 3/4" and 1-1/8" bore

 
 
Allenair Small Bore, 1/2", 3/4" and 1-1/8"  bore
 
 
DESIGN FEATURES
 
Cylinders are not throw away type. Seals can easily be replaced when required after a long trouble-free life. They have corrosion resistant brass tubing, precision honed (16 Micro or better) with cross hatch lubricant retaining pattern. Front and Rear Heads are precision machined and threaded into the tube.
 
Pressure Rating: 150 P.S.I. Pneumatic or Hydraulic.
Breakaway: Approximately 5-10 P.S.I.
 
BASIC CONSTRUCTION
1/2” & 3/4” BORES: Feature low friction U-Cups on the Duronze Piston, coupled with a 416 Stainless Rod. These Cylinders are available as standard in half-inch increments to 6” stroke.
1-1/8” BORE: Features an all-O-Ring construction. Aluminum Piston ground and polished 416 stainless steel rod. Cylinders are available as standard in half-inch increments to 6” and inch increments to 12” stroke.
Special strokes available in all bore sizes. Up to 14” maximum on 1-1/8” bore and 10” maximum on 1/2” & 3/4” bores.
 
 
 
 
 

CONTACT US

1069 Serpentine Lane

Pleasanton, CA 94566

Phone (877) 600-8585

Fax       (925) 426-9539

sales@tecopneumatic.com