PRODUCTS >> Air Preparation >> Regulators >> Proportional Regulators (I/P, E/P) >> Control Air T595XP Explosion Proof I/P

Control Air T595XP Explosion Proof I/P

 
 
T595XP Explosion-Proof I/P Transducer
High level of regulation accuracy and repeatability for the operation of actuated valves
 
The Type-595XP Explosionproof I/P (current to pressure) transducer converts a 4–20mA electrical current signal to a proportionally linear pneumatic output. The unique conversion technology utilizing open loop control provides a high level of accuracy and repeatability for the operation of actuated valves.
A low mass control circuit provides consistent output in high vibration applications.
 
This compact unit is housed in an explosion proof enclosure that is designed for pipe, bracket or direct manifold mounting. This explosion-proof and intrinsically safe field device is available with an integral volume booster or as a low-flow signal converter that directly mounts to a pneumatic valve positioner.
The Type-595XP has worldwide agency approvals for use in hazardous areas.
 
Multiple choices for wiring and porting simplify installation and decrease the time required to do so. In addition to standard wall, panel or pipe mounting, optional DIN rail and manifold mounting kits are available.
The ControlAir Type-925 Multifunction Manifold provides a common supply port and individual shutoff valves for sets of 3, 5, 10 or 15 units.
 
 
Specifications
Functional Specifications
 
T595-P
T595-M,N
 
P Connection (with Flow Booster)
M & N Connection (without Flow Booster)
Inputs
4-20 mA
4-20 mA
Outputs
3-15 psig
0.20-1.0 BAR
3-27 psig
0.20-1.8 BAR
6-30 psig
0.40-2.0 BAR
3-15 psig
0.20-1.0 BAR
3-27 psig
0.20-1.8 BAR
6-30 psig
0.40-2.0 BAR
Air Consumption
0.1 scfm (0.17m3/hr)
2.00 scfh (0.06 m3/hr) @ 
20 psig supply (1.4 BAR)
4.94 scfh (0.14 m3/hr) @ 
85 psig supply (6.0 BAR)
8.36 scfh (0.24 m3/hr) @150 psig supply (10.0 BAR)
Supply Pressure
Note: Supply pressure must be a minimum of 5 psig (0.3 BAR) above maximum output
3-15:
22 psig 
(1.5 BAR) max
3-27, 6-30:
42 psig 
(2.8 BAR) max
150 psig (10.0 BAR) max.
Flow Capacity
2.4 scfm (4.1 m3/hr)max.
Same as Air Consumption
Temperature Limits
-67°F to 185°F (-55°C to 85°C)
-67°F to 185°F (-55°C to 85°C)
Relative Humidity
75% average - 95% short time non-condensing
75% average - 95% short time non-condensing
Impedance
260 Ohms @ 70°F
260 Ohms @ 70°F
Loop Load
5.2 Volts @ 70°F
5.2 Volts @ 70°F
 
 
 
Performance Specifications
 
STANDARD RANGE
ZERO-BASED RANGE
Linearity (Independent)
<± 0.5% of span
<± 0.5% of span
Hysteresis
<±0.3% of span
<±0.3% of span
Deadband
<±0.1% of span
<±0.1% of span
Repeatability
<±0.3% of span; 
<±0.15% of span typical
<±0.3% of span; 
<±0.15% of span typical
Mounting Orientation Effect
<±0.5% / 90 degree change
<±0.5% / 90 degree change
Air Supply Sensitivity
<.3% / 1.5 (0.10 BAR) psig change
<±0.6% / 25 (1.72 BAR) psig change
Vibration Effect
<±1% up to 10g 
and 20-80 Hz
<±1% up to 10g and 20-80 Hz
Temperature Effect
<±0.75% / 10°F (5.6°C) change
<±0.75% / 10°F (5.6°C) change
 
 
 
Physical Specifications
Housing
NEMA 4X (IP 65)
Port Sizes
Pneumatic:
1/4" NPT (P & N versions); 
1/16" manifold mount (M version)
1/8" NPT Gauge Port (P version)
Electric:
1/2" NPT, M20-1.5 (ATEX)
Media
Clean, dry, oil-free, instrument air, filtered to 40 micron
Electrical Connections
Terminal block
Mounting
Direct (standard) or 2" pipe (optional)
Mounting
 
 
Housing: Chromate-treated aluminum with epoxy paint. NEMA 4X (IP65)
Elastomers: Buna-N
Trim: Stainless steel; brass; zinc-plated steel
Weight
P version=1.40 lbs (0.64 kg) N version=1.25 lbs (0.57 kg) 
M version=1.20 lbs (0.54 kg)
 
 
 
 
 

CONTACT US

1069 Serpentine Lane

Pleasanton, CA 94566

Phone (877) 600-8585

Fax       (925) 426-9539

sales@tecopneumatic.com

ASSOCIATED PRODUCTS